The Burris Veracity PH riflescope is known for its precision and reliability, but like any piece of equipment, it can occasionally experience issues. One such problem some users encounter is the elevation knob not resetting to zero. This can significantly impact accuracy and shooting performance. This article will delve into the potential causes of this problem, offering troubleshooting steps and solutions to get your Burris Veracity PH back in top shape.
Understanding the Burris Veracity PH Elevation Mechanism
Before troubleshooting, understanding how the elevation knob functions is crucial. The Veracity PH uses a precise, click-adjustable mechanism. Each click corresponds to a specific adjustment in minutes of angle (MOA) or milliradians (MRAD), depending on your model. This intricate system is susceptible to several issues that can prevent the elevation knob from resetting.
Potential Causes of Elevation Knob Malfunction
Several factors can contribute to a Burris Veracity PH elevation knob refusing to reset:
-
Dirt, Debris, or Damage: Dust, dirt, or other debris can accumulate within the elevation mechanism, causing friction and preventing smooth operation. Physical damage to the knob or internal components from drops or impacts is another possibility.
-
Loose or Damaged Screws: The elevation turret is secured by several small screws. If these become loose or damaged, the turret’s alignment can be compromised, affecting the reset function.
-
Internal Mechanical Failure: While rare, internal mechanical components within the elevation mechanism can wear out or break down over time or due to misuse. This could involve broken springs, stripped gears, or other internal failures.
-
Incorrect Adjustment Procedure: Improperly adjusting the elevation knob, such as forcing it past its limits, could potentially cause internal damage or misalignment.
Troubleshooting Steps: Getting Your Elevation Knob Back to Zero
Let's walk through systematic troubleshooting steps to resolve the elevation knob issue:
Step 1: Cleaning and Inspection
-
Remove the Scope: Carefully remove the Burris Veracity PH riflescope from your firearm.
-
Inspect the Knob: Thoroughly examine the elevation knob for any visible damage, such as cracks, dents, or loose parts. Pay close attention to the screw securing the elevation turret.
-
Clean the Knob: Use a soft brush, compressed air, and a lint-free cloth to gently clean any dirt or debris from the elevation knob and its surrounding area. Avoid using harsh chemicals or solvents.
-
Check for Loose Screws: Examine the screws securing the elevation turret. If any are loose, carefully tighten them using a small, appropriately sized screwdriver. Do not overtighten.
Step 2: Internal Inspection (Advanced)
If cleaning and tightening screws don't resolve the issue, you might need to proceed with a more in-depth internal inspection. This is best left to a qualified gunsmith. Attempting internal repairs without the proper knowledge and tools could cause further damage.
A gunsmith will disassemble the elevation mechanism to check for:
- Broken or Worn Components: Inspection for broken springs, stripped gears, or other internal damage.
- Alignment Issues: Checking for misalignment within the internal components.
Step 3: Contacting Burris Customer Support
If you've tried the above steps and are still experiencing problems, contacting Burris customer support is recommended. They can provide expert advice, troubleshooting assistance, and potentially warranty service if needed.
Preventative Maintenance: Keeping Your Veracity PH in Top Condition
Regular preventative maintenance can help avoid future elevation knob issues:
- Regular Cleaning: Clean your riflescope regularly, paying attention to the elevation knob and turret.
- Proper Handling: Avoid dropping or impacting your riflescope.
- Storage: Store your riflescope in a dry, clean environment to prevent dust and debris accumulation.
Case Study: A User's Experience
One user reported their Veracity PH elevation knob becoming stuck after a fall. After attempting cleaning and tightening screws, the problem persisted. Contacting Burris resulted in the scope being sent for repair under warranty, where a damaged internal spring was identified and replaced.
Conclusion: Resolving Burris Veracity PH Elevation Knob Problems
A Burris Veracity PH elevation knob that won't reset can be frustrating, but often, the solution is straightforward. By systematically following the troubleshooting steps outlined above, and seeking professional help when necessary, you can restore the accuracy and reliability of your riflescope. Remember, preventing future problems through proper maintenance is key to preserving your scope's performance and longevity.